How to use ALIS Decking Oil No. 579

 

This information is available in a print friendly pdf version. Download Alis Decking Oil How to & Technical Data Sheet.

 

Preparation The surface must be absorbent, solid, clean, dry and free of dust. When necessary, remove algae, mushrooms, etc. with GLOUROS Cleaner No. 1806 completely.

 

Application Stir thoroughly and remove possible skin formed on surface.

Terraces - Apply two coats by brushing in the direction of the wood grain at temperatures above 10 °C (50 °F), low humidity and dry weather. After 5 — 10 minutes spread the unabsorbed oil with a brush.

Facades - Apply three coats by brushing in the direction of the wood grain.

Cleaning Clean with GLOUROS Cleaner No. 1806 at least once a year.

 

Care and cleaning Do after care with ALIS Decking Oil No. 579 when the surface wear marks becomes visible or when the surface looks matt.

 

Important tips Always do a test application on an inconspicuous area to check the compatibility with the existing coating and the previously applied polishes or maintenance products, or the coverage or color to establish. There should be no oil film on the surface after the application, and when there is, please remove immediately with a lint free cloth. Please treat strongly weathered exterior areas, such as porch floorings or wooden fences only when the wood is completely dry. As the moisture content of Bangkirai and teak decreases very slowly, these kinds of wood should be treated during a dry weather period only.

 

 

ALIS Decking Oil is also suitable for toys. In the exterior, a last treatment of KALDET Penetrating Wood Stain No. 270 in the right colortone is recommended.

 

 

These directions are the result of long years of research and practical testing. They are backed by our most current expert information. New findings may invalidate this information. This data sheet is meant to serve as information and instruction. No legal liability should be interpreted from it. In case of doubt, please contact the retailer, wholesaler, or manufacturer.

 

 

Technical Data Sheet for ALIS Decking Oil No. 579

 

 

Application range For exterior timber such as teak, Bangkirai, larch, Douglas pine and cedar. As an initial treatment and for the maintenance of terraces and wooden facades.

 

Technical qualities Produces after the 2nd coat a waterproof, water repellent, and UV resistant surface. Revitalized after the treatment.

 

Full declaration Linseed oil, wood oil, linseed oil - wood oil - stand oil, orange oil, isoaliphates, linseed oil - stand oil - natural resin ester, earth - and mineral pigments, dehydrated amino sugar and drying agents free of lead.

 

Colors 022 boxwood 048 chestnut1 068 light teak 072 oak 101 black 554 Oregon pine 593 larch Corresponds to the color tone of many exotic hardwoods.

Depending on the type of wood and the surface roughness, the color impression can vary considerably. The rougher the wood, the darker the color.

 

Application method Stir thoroughly and remove possible skin formed on surface. 2 Coats with a brush or roller in the direction of the wood grain and by temperatures above 10°C (50°F) and low humidity and dry weather. Apply 3 coats on windows and facades. Spread after 5 — 10 minutes the excess surface oil with a brush.

 

Coverage Must be determined by doing a test application.

For profiled (fluted) terrace wood:

First coat: 1 liter (1.06 quart) is sufficient for approximately 7 m2 (75 ft2), i.e. 140ml/m².

Second coat: 1 liter (1.06 quart) is sufficient for approximately 35 m2 (377 ft2), i.e. 30ml/m².

On planed wood the consumption can be up to 3 times less.

 

Drying time At 23 °C (73 °F) and 50% relative humidity: approximately 5 to 8 hours. The 2nd and 3rd coat can be applied after approximately 18 hours. At higher temperatures, please consider shorter drying times, and by lower temperatures, longer drying times.

 

Cleaning Clean equipment immediately after use with SVALOS Thinner No. 222 or LEVO Brush Cleaner No. 997.

 

Specific gravity Approximately 0.87 g/ml.

 

Safety advice

The product itself will not combust spontaneously.

Contains limonene and Cobalt (2+) salts. Can cause allergic reactions.

R 43 May cause sensitization by skin contact.

S 2 Keep out of the reach of children.

S 24 Avoid contact with skin.

S 37 Wear suitable gloves.

S 62 If swallowed, do not induce vomiting: seek medical advice immediately and show the container or label. 

 

Disposal According to locally regulated laws.

 

Container sizes 0.25 l; 0.75 l; 2.5 l; 5 l; 10 l; 30 l.

 

Storage Cool and dry. Please see label for expiry date.

 

Always be sure to store and then dispose of cleaning cloths, polishing pads, sponges, etc. that are still wet or even slightly moist with ALIS Decking Oil No. 579 in an airtight metal container or in water, as there is a danger of spontaneous combustion caused by the plant oil content.

 

< Back to Paints, oils and varnishes